Description
This is a Tall basin mixer faucet designed for modern bathrooms. Its height indicates it is specifically intended for use with vessel (above-counter) basins.
Design Overview
-
Body Style: It features a sleek, cylindrical mono block body with a minimalist aesthetic.
-
Finish: The faucet has a high-gloss polished chrome finish.
-
Handle: It uses a single-lever joystick-style handle located at the top for easy control of both water temperature and flow rate.
-
Spout: The fixed horizontal spout includes an integrated aerator to ensure a smooth, splash-free stream of water.
Key Specifications for Installation
Because this is a tall-profile faucet, you should verify the following before purchasing or installing:
| Feature | Detail |
| Mounting | Requires a single-hole installation directly into the countertop/deck. |
| Height | The extra-long body is designed to clear the high rim of a bowl-style basin. |
| Reach | The spout extends forward to ensure the water lands safely within the basin rather than hitting the back edge. |
Physical Dimensions
-
Total Height: Typically 10 to 12.5 inches
-
Spout Height: Generally 8 to 9 inches to clear the rim of a vessel sink.
-
Spout Reach: Usually 5 to 6 inches from the center of the faucet body to the aerator.
-
Mounting Hole: Requires a single hole with a diameter of 1.25 to 1.5 inches
2. Performance & Flow
-
Flow Rate: Standard models are restricted to 1.2 GPM (4.5 L/min at 60 PSI to comply with water-saving regulations.
-
Operating Pressure: * Minimum: 0.5 bar
-
Recommended: 1.0 bar
-
Maximum: 5.0 bar
-
-
Temperature: Designed for a maximum hot water temperature of 185°F (85°C), though standard home settings are usually 120°F (49°C).
3. Material & Component Specs
-
Body Material: Solid Brass (typically H59 or H62 Grade) for corrosion resistance.
-
Cartridge: Ceramic Disc Cartridge (usually 35 mm. These are tested for a lifespan of roughly 500,000 cycles (on/off movements).
-
Finish: Multi-layer Polished Chrome electroplating (often tested with a 24-hour salt spray test to ensure it won’t peel or rust in humid bathrooms).
-
Aerator: Integrated honeycomb aerator to prevent splashing and reduce noise.
4. Installation Requirements
-
Type: Deck-mounted (on the countertop).
-
Supply Lines: Typically includes two 24-inch flexible stainless steel braided hoses with 1/2″ female compression fittings
-
Maximum Deck Thickness: Usually up to 1.5 inches . If your countertop is thicker (like heavy granite), you may need an extended mounting shank.
Reviews
There are no reviews yet.